Hydraulic Indexing Tool

Product Code: wv pid 055

The Hydraulic Indexing Tool is designed to provide slow controlled rotation of a coiled tubing BHA. By simply increasing the flow rate through the nozzle within the tool, the back pressure created moves a hydraulic piston linearly downwards within the tool. This movement is transferred into rotary motion turning the lower end of the tool by up to 120° each cycle and up to 1000 ft-lbs of torque. At the end of each stroke, the torque induced is mechanically locked into the tool allowing the piston to return to its initial position. This cycling process can be repeated as often as is required, simply by increasing and decreasing the fluid flow through the tool.

Benefits:

  • Slow controlled high torque output
  • Adjustable up to 120° for each cycle
  • Torque mechanically locked into the tool after each stroke
  • Simple to re-dress
  • Pressure drop at surface following each cycle

Technical Specification

Tool OD (in) 2-2/8" 2-7/8"
Tool ID (in) 9/16" 15/16"
Connection 1½" AMMT 2-3/8" PAC DSI Box x Pin
Tensile Strength (lbs) 80,000 110,000
Overall Length (inches) 46.000" 50.000"

The information provided above is for typical common tool sizes only, additional tool sizes and variations are available.

Note: The equipment specifications provided are for information purposes only and may be subject to change without notice.

Get Adobe® Reader
View PDF Data Sheet

View PDF Datasheet